Pool and Spa Accessories

1/2" Nonmetallic Hub Kit
156PA13713A

All Intermatic Control Centers and Control Panels are approved for direct underwater light connection, eliminating the need for additional junction boxes. These Nonmetallic Hub Kits provide direct connection to 12 Volt and 120 Volt underwater luminaries.

3/4" Nonmetallic Hub Kit
156PA13714

All Intermatic Control Centers and Control Panels are approved for direct underwater light connection, eliminating the need for additional junction boxes. These Nonmetallic Hub Kits provide direct connection to 12 Volt and 120 Volt underwater luminaries.

1" Nonmetallic Hub Kit
156PA13715A

All Intermatic Control Centers and Control Panels are approved for direct underwater light connection, eliminating the need for additional junction boxes. These Nonmetallic Hub Kits provide direct connection to 12 Volt and 120 Volt underwater luminaries.

1/2" Metallic Hub Kit
156PA14336A

The Metallic Hub Kit is used for the exact same type of applications as the Nonmetallic Hub Kits, but is designed for applications that require red brass conduit.

4 Stand-Off Posts
21T156A

Stand-Off Posts are used for mounting toggle switches inside any Intermatic Pool/Spa Control Center and Control Panel. The switches are normally used for on-demand control pool/spa lighting, landscape lighting, water features, etc. The dead front is detached, the switch knockout is removed from the dead front and the stand-off post is secured to the back panel of the enclosure. The switch is then mounted to the posts with standard mounting screws and the dead front is re-attached.

2 Stand Off Posts
21T166A

Stand-Off Posts are used for mounting toggle switches inside any Intermatic Pool/Spa Control Center and Control Panel. The switches are normally used for on-demand control pool/spa lighting, landscape lighting, water features, etc. The dead front is detached, the switch knockout is removed from the dead front and the stand-off post is secured to the back panel of the enclosure. The switch is then mounted to the posts with standard mounting screws and the dead front is re-attached.

Back-Feed Retainer Kit
22T904A

A recent revision to the breaker base in all Intermatic Pool/Spa Control Panels now allows installers to back feed the branch circuits using one breaker, single or double pole, as a main disconnect. In accordance with NEC Article 408.36 (F) –2005, the installation requires an additional fastener/retainer kit.

Emergency Shut Off Switch
PA600

The revised Article 680-12 of the National Electrical Code (NEC) now requires the installation of a disconnect switch “...located with in sight from all pools, spas...” This Safety Switch is intended for disconnecting electrical equipment from its power source, quickly and safely, in case of emergency. Any person, even if not familiar with the installation or safety procedures, can shut down the connected equipment by simply moving the large red lever to the OFF position. It fits in a single gang junction box and is rated for outdoor installations.

Specifications

• Electrical Rating: 1 HP - 120V, 3 HP - 240V, 20 Amp Resistive 120/240V DPST
• Shipping Weight: 0.5 lbs (0.2 kg)
• Housing: Electrical grade plastic.
• Face Plate: Beige powder coated steel.
• Agency Approval: CSA/C-US